If you have a Nexus 7 device that is hardbricked and shows up as QHSUSB_DLOAD in Device Manager, you might be wondering how to fix it. This issue usually happens when the bootloader is corrupted or erased, and prevents the device from booting up normally. Fortunately, there is a way to restore your Nexus 7 to working condition by using a Qualcomm driver and a flash tool.
In this article, we will show you how to download and install the Qualcomm HS-USB QDloader 9008 driver for Windows, which is compatible with Nexus 7 devices that have a Qualcomm chipset. We will also guide you through the steps of flashing a stock firmware on your Nexus 7 using QFIL (Qualcomm Flash Image Loader).
Download Qualcomm HS-USB QDloader 9008 Driver
The first step to fix the Qhsusb Dload Driver Nexus 7 issue is to download and install the Qualcomm HS-USB QDloader 9008 driver on your Windows PC. This driver will allow your PC to recognize your Nexus 7 device when it is connected in EDL (Emergency Download) mode.
To download the Qualcomm HS-USB QDloader 9008 driver, follow these steps:
Go to this link[^1^] and download the Qualcomm Driver zip file.
Extract the zip file on your computer.
According to your Operating System version, select a 32-Bit or 64-Bit setup.
Choose the Setup as âFree Bldâ and click on the Next button.
Accept the license agreement terms to complete the installation process.
Flash Stock Firmware on Nexus 7 using QFIL
The next step to fix the Qhsusb Dload Driver Nexus 7 issue is to flash a stock firmware on your Nexus 7 device using QFIL. This tool will allow you to write a new bootloader and system image on your device's memory, which should fix the hardbrick problem.
To flash stock firmware on Nexus 7 using QFIL, follow these steps:
Download the stock firmware for your Nexus 7 device from this link[^2^] and extract it on your computer.
Download QFIL from this link and extract it on your computer.
Open QFIL.exe as administrator.
Select Flat Build in the top left corner.
Click on Browse and locate the prog_emmc_firehose_*.mbn file from the stock firmware folder.
Click on Load XML and select rawprogram0.xml and patch0.xml from the stock firmware folder.
Turn off your Nexus 7 device and connect it to your PC using a USB cable while holding Volume Up and Volume Down buttons simultaneously. This will put your device in EDL mode.
In QFIL, you should see Qualcomm HS-USB QDloader 9008 under Port in the top right corner. If not, try reinstalling the driver or changing the USB port.
Click on Download and wait for the flashing process to complete. It may take several minutes.
Once done, disconnect your device and reboot it. It should boot up normally now.
In this article, we have shown you how to fix the Qhsusb Dload Driver Nexus 7 issue by downloading and installing the Qualcomm HS-USB QDloader 9008 driver and flashing a stock firmware on your device using QFIL. We hope this guide was helpful and you were able to revive your hardbricked Nexus 7 device. If you have any questions or suggestions, feel free to leave a comment below.